Black Powder Coated Bottom Floor Guide Stay Roller Adjustable Channel for Sliding Barn Door Hardware Wall Mount by Toprema Review
- Make sure this fits by entering your model number.
- Made of Black Powder Coated Steel, elegant, rust resistance and solid for long lasting use.
- Mounts to Wall, Newly Designed Flat Bottom, no damage to floors.
- Adjustable rollers make it fit for doors with thickness up to 2.05″ / 5.2cm. Design with adjustable nut on top of the horizontal bracket makes adjustment easier. (Note: The distance between wall and door should be at least 1.61″ / 4.1cm for door to be straight and 2 rollers work well, or remove one roller to use it as a one-roller style)
- 2 Small Rollers sit on each side of the door for a smooth, quiet and secure slide. Prevent your door from swaying. Suitable for both interior and exterior use.
- 2PCS M6*40 screws, 2PCS White Ribbed Plastic Anchors are included for easy installation. White Ribbed Plastic Anchors adds stability when used with concrete walls. (When used with wooden walls, it is not necessary to use them)
Are you looking for a workable reliable floor guide for your sliding barn door to prevent sway?
Come and buy this adjustable wall mounted floor guide which not only prevents door sway but also provides smooth and quiet operation!
Specification:
Material: Black powder coated steel frame & rollers
Whole Dimension: 4.88 x 1.97 x 2.6 inch / 12.4 x 5 x 6.6 cm (L x W x H)
Thickness of the Metal: 0.2 inch / 0.5 cm
Each Roller Diameter: 0.79 inch / 2 cm
Max. Door Thickness: 2.05″ / 5.2 cm
The distance between wall and door should be at least 1.61″ / 4.1cm. If it is less than that, you can remove one roller to use it as a one-roller guide.
The distance between door bottom and floor should be at least 0.35″ / 0.9cm.
Installation Method:
1. Make sure the clearance from your door bottom to floor is greater than 0.35″/0.9cm.
2. Put the floor guide under the door, door between the 2 rollers.
3. Measure the safety distance and mount the floor guide onto wall using the provided screws.
4. Adjust the rollers to make sure enough space is left for the door to slide inside. Tighten the adjustment nut and you are ready to glide!
Package includes:
1 x Floor Guide
2 x M6*40 Screws
2 x White Ribbed Plastic Anchors